310S Stainless Steel Round Bar with Oxidation Resistance to 1150 C and Carburisation Resistance for Straightness Critical Furnace Rollers
Product Details:
| Place of Origin: | Shanxi, China |
| Brand Name: | Taigang |
| Certification: | ISO 9001:2015, EN 10204 3.1 MTC |
| Model Number: | 310S Round Bar |
Payment & Shipping Terms:
| Minimum Order Quantity: | 500 Kilograms |
|---|---|
| Price: | USD 2200-6500 / Metric Ton |
| Packaging Details: | Interleaved bundles, steel strapped, seaworthy wooden crate with timber dunnage |
| Delivery Time: | 7 days for stock sizes, 20-30 days for custom cutting |
| Payment Terms: | T/T, L/C at sight |
| Supply Ability: | 800 Metric Tons per Month |
|
Detail Information |
|||
| Diameter Range: | 6mm - 300mm | Length: | 3000mm / 6000mm Or Fixed Cut |
|---|---|---|---|
| Tolerance: | H9 / H11 | Surface Finish: | Pickled, Peeled, Turned Or Ground |
| Condition: | Solution Annealed / Annealed | Test Certificate: | EN 10204 3.1 |
| Delivery State: | Straight, Chamfered Ends On Request | ||
| Highlight: | Oxidation Resistant to 1150C,Furnace Roller 25Cr 20Ni Bar,Solution Annealed Heat Resisting Rod |
||
Product Description
310S is a high chromium, high nickel austenitic stainless steel with a controlled carbon level of 0.08% maximum, giving it outstanding resistance to oxidation and to carburising and nitriding atmospheres at elevated temperature. The 25% chromium and 20% nickel balance keeps the structure fully austenitic and stable through repeated thermal cycling.
We produce 310S round bar from 6mm to 300mm in hot rolled annealed, peeled or centreless ground condition, with straightness controlled for roller applications. The grade is specified for furnace furniture, radiant tubes, retorts, kiln internals and any component that must survive hundreds of heating and cooling cycles without scaling away.
- Oxidation Resistance to 1150 °C: The high chromium content forms a dense, self-healing chromium oxide layer that resists scaling in air and combustion gas to approximately 1150 °C continuous and 1200 °C intermittent service.
- Stable Austenitic Structure: A 25% chromium, 20% nickel balance keeps the matrix austenitic even after long exposure at temperature, avoiding the sigma-related embrittlement that limits leaner heat-resisting grades.
- Carburisation and Nitriding Resistance: The grade tolerates carbon- and nitrogen-rich furnace atmospheres better than 309 or 304, making it a practical choice for case hardening trays, retorts and muffle internals.
- Creep and Thermal Fatigue Tolerance: Slow carbon control and a coarse, stable grain structure give useful creep strength in the 800 °C to 1000 °C band and resist thermal fatigue cracking under cyclic furnace duty.
- Straightness for Rollers: Bars intended for furnace rollers are straightened and inspected for runout so that the finished roller tracks true and does not induce strip wander inside the furnace.
- Weldable With Matching Filler: Fabrication with 310S or 25/20 filler produces sound joints for tray frames and supports; a post-weld anneal is only required for severe cyclic or reducing service conditions.
| Grade / UNS | 310S / S31008 |
|---|---|
| Chemical Composition | C 0.08 max, Cr 24.0–26.0, Ni 19.0–22.0, Si 1.5 max, Mn 2.0 max |
| Standard | ASTM A276, ASTM A479, ASTM A312 |
| Diameter Range | 6mm – 300mm |
| Condition | Solution annealed 1030–1180 °C, pickled or bright |
| Tensile Strength | 515 MPa minimum |
| Yield Strength | 205 MPa minimum |
| Elongation | 40% minimum in 50mm |
| Max Service Temperature | 1150 °C continuous, 1200 °C intermittent |
| Tolerance | h9 / h11 drawn, ±0.05mm ground on request |
| Surface Finish | Pickled, turned, peeled, ground, or polished Ra 0.8 |
| Length | 3000mm / 6000mm random or fixed cut to 0.5mm |
| Test Certificate | EN 10204 3.1 mill test certificate per heat |
310S is solution annealed between 1030 °C and 1180 °C followed by rapid cooling to dissolve carbides and homogenise the austenite. Service exposure above 650 °C for long periods will precipitate sigma phase in any 25/20 alloy, so components that must be cycled should be specified with a grain size and, for critical duty, checked for sigma content after long-term ageing. Machining is best done in the annealed condition with generous coolant, because the grade work hardens and conducts heat poorly.
Common applications include furnace rollers and skid rails, radiant tubes, annealing and carburising baskets, muffle and retort shells, kiln furniture, thermocouple protection tubes, cement and lime plant internals, glass industry supports, heat treatment fixtures, and burner nozzles. The grade is also used for high-temperature fasteners and for recuperator components in sulphur-free combustion environments.
Roller-grade bar is packed in timber cradles to preserve straightness, with each bar individually protected against handling marks and bundle labels showing grade, heat number, diameter and measured runout. Export shipments are braced inside the container with dunnage. On request we provide ultrasonic inspection, dimensional reports and third-party inspection certificates before loading.
Quote requests should state grade 310S, diameter, straightness tolerance, finish, length and whether the bar will be used as a roller with a specified runout. We can supply ground bar to h9, bored or drilled blanks, cut-to-length pieces with machined ends, and bars with certified elevated-temperature properties where the application requires design data at 900 °C.





