430 Ferritic Free Cutting Polished Stainless Round Bar For Fastener Parts
Product Details:
| Place of Origin: | Shanxi, China |
| Brand Name: | Taigang |
| Certification: | ISO 9001:2015, EN 10204 3.1 Mill Test Certificate |
| Model Number: | 430 Round Bar S43000 |
Payment & Shipping Terms:
| Minimum Order Quantity: | 1000 Kilograms |
|---|---|
| Price: | USD 1.9-3.4 / Kilogram |
| Packaging Details: | Plastic film bundle with wooden case |
| Delivery Time: | 7-10 days for stock sizes |
| Payment Terms: | T/T,L/C at sight |
| Supply Ability: | 2000 Tons per Month |
|
Detail Information |
|||
| Port: | Shanghai | Package: | Standard Sea-worthy Packing |
|---|---|---|---|
| Keyword: | Stainless Steel Round Bar | Place Of Origin: | Shanxi, China |
| Grade: | 430 / UNS S43000 / 1.4016 | Diameter: | 6mm - 300mm |
| Length: | 3000mm / 6000mm Or Cut To Order | Tolerance: | H9 / H11 |
| Finish: | Annealed, Pickled, Polished, Bright | Magnetic: | Yes (ferritic) |
| Hardness: | ≤183 HB | Standard: | ASTM A276, ASTM A582, EN 10278 |
| Highlight: | 430 Ferritic Stainless Round Bar,1.4016 Free Cutting Rod,Polished Ferritic Bar |
||
Product Description
430 is a nickel-free ferritic grade, and the absence of nickel is the point: it delivers useful corrosion resistance indoors and in mild outdoor conditions at a cost well below 304, without the nickel price volatility that complicates long-term contracts. With 16 to 18 percent chromium and carbon held below 0.12 percent, the bar resists oxidation, nitric acid and many food environments, and it is magnetic, which is sometimes an advantage for sensors and fixtures.
The free-cutting versions are formulated with controlled sulphur to improve chip breakage on automatic lathes, making the grade popular for high-volume fastener, fitting and appliance parts. Its limitations should be understood as well: ductility at low temperature is lower than austenitic grades, and it is not intended for aggressive chloride or welded heavy-section service. We supply it annealed and polished, cut to length, with certificates showing the actual chemistry.
- Nickel-Free Cost: With no nickel addition, the price per kilogram stays well below 304 and is less exposed to nickel market swings, which helps buyers hold stable prices on long contracts.
- Free-Cutting Behaviour: Controlled sulphur and the ferritic structure promote short chip formation on automatic lathes, raising productivity in high-volume fastener and fitting production.
- Good Indoor Corrosion Resistance: Chromium at 16 to 18 percent provides reliable resistance to indoor atmosphere, food contact, nitric acid and many household chemicals at moderate cost.
- Magnetic Structure: The ferritic structure is magnetic at room temperature, which suits sensor targets, magnetic clamping fixtures and applications where magnetic response is required.
- Polished Surface: Annealed and polished bars give a clean, uniform skin suitable for visible appliance trim, kitchen equipment and decorative hardware.
- Weldable in Thin Section: The grade can be welded in thin sections with matching filler, and annealing after welding restores ductility where the joint will be formed or bent.
| Parameter | Specification |
|---|---|
| Grade | 430 / UNS S43000 / 1.4016 |
| Chemical Composition | C ≤ 0.12, Si ≤ 1.0, Mn ≤ 1.0, Cr 16–18, Ni ≤ 0.75 |
| Tensile Strength | ≥ 450 MPa |
| Yield Strength | ≥ 205 MPa |
| Elongation | ≥ 22 percent |
| Hardness | ≤ 183 HB |
| Magnetic | Yes, ferritic at room temperature |
| Diameter Range | 6 mm to 300 mm |
| Standard | ASTM A276, ASTM A582, EN 10278 |
| Packing | Plastic film bundle, wooden case |
430 bar is turned into fasteners, hinges, handles, appliance trim, washing machine components, automotive exterior trim, kitchen utensil parts, burner components and general hardware that sees indoor or mild outdoor conditions. It is also used for decorative frames and shop-fitting hardware where a brushed or polished surface and a magnetic response are acceptable.
Because it is not intended for heavy chloride exposure, we recommend 304 or 316 when the part will be washed with chlorinated water or installed near the coast. Our engineers will say so directly when an inquiry describes that environment.
Bars are bundled by diameter, wrapped in plastic film, strapped with steel band and packed into wooden cases or loaded into containers with timber separators. Bundle labels show grade, heat number, diameter and quantity.
EN 10204 3.1 certificates with chemical analysis and mechanical properties accompany the shipping documents, and a certificate of origin is provided for customs. Surface and dimensional inspection is carried out before packing, and claims are handled by replacement or credit after review of the inspection report.
Tell us the grade, diameter, length, surface finish and quantity, and we will reply with a technical quotation within one working day. Round bars from 6 mm to 300 mm are cut on our band saws and lathes, bundled by diameter, wrapped in plastic film, and loaded into 20 or 40 foot containers.
Sample lengths of 300 mm are available for material verification before bulk orders are released. Our sales engineers will confirm mill certificates, heat numbers and delivery dates in writing so that your purchasing team has a complete paper trail from inquiry to container loading.



