• 17-4PH Forged Stainless Steel Round Bar for Marine Propeller Shaft Applications
17-4PH Forged Stainless Steel Round Bar for Marine Propeller Shaft Applications

17-4PH Forged Stainless Steel Round Bar for Marine Propeller Shaft Applications

Product Details:

Place of Origin: Shanxi, China
Brand Name: Taigang
Certification: ISO 9001:2015, EN 10204 3.1 Mill Test Certificate
Model Number: Marine Shaft Bar 17-4PH

Payment & Shipping Terms:

Minimum Order Quantity: 300 Kilograms
Price: USD 6.5-18.0 / Kilogram
Packaging Details: Wooden case with rust preventive wrap
Delivery Time: 15-25 days depending on grade
Payment Terms: T/T,L/C at sight
Supply Ability: 600 Tons per Month
Get Best Price Contact Now

Detail Information

Port: Shanghai Package: Standard Sea-worthy Packing
Keyword: Stainless Steel Round Bar Place Of Origin: Shanxi, China
Grade: 17-4PH (S17400), 316L, 2205, 2507 Diameter: 6mm - 300mm
Length: Cut To Order, Up To 6000mm Tolerance: H9 / H11, Ground On Request
Finish: Turned, Ground, Polished Condition: 17-4PH In H900 Or H1150
Yield Strength: Up To 1000 MPa Standard: ASTM A564, ASTM A276, ABS / DNV On Request
Highlight:

Marine Propeller Shaft Round Bar

,

17-4PH Forged Shaft Stock

,

Seawater Resistant Shaft Bar

Product Description

Product Overview

A propeller shaft must simultaneously carry torque, withstand bending loads from the propeller, and resist corrosion attack from seawater — which narrows the material choice considerably compared with a general-purpose shaft. This product line covers the three grades most often specified for marine service: 17-4PH precipitation hardening stainless steel for high-strength shafts on fast craft and workboats, 316L for smaller pleasure craft and rudder stock, and 2205 or 2507 duplex for shafts that must combine strength with chloride resistance in continuous immersion.

Bars are forged or hot rolled, heat treated, straightened, and turned or ground to the requested diameter. Ultrasonic testing is available for shafts that will be classed by a classification society. Shaft blanks can be supplied pre-machined with a rough turning allowance, keyway stock, or tapered ends prepared to your drawing.

Key Features
  • High Strength 17-4PH: In the H900 condition, 17-4PH reaches a yield strength near 1000 MPa, allowing a smaller shaft diameter than 316 for the same torque on fast craft and workboats.
  • Three Grade Options: 17-4PH, 316L, 2205, and 2507 grades cover the range from pleasure craft rudder stock to continuously immersed workboat propeller shafting.
  • Seawater Corrosion Resistance: 316L and duplex grades resist pitting and crevice attack in seawater, while 17-4PH in the overaged H1150 condition offers strength with acceptable marine corrosion performance.
  • Forged and Heat Treated: Bars are forged or rolled, solution treated and aged to the specified condition, then straightened and turned to give a homogeneous structure free from casting defects.
  • Non-Destructive Testing: Ultrasonic inspection to detect internal defects, plus magnetic particle or dye penetrant checks on the surface, can be performed for classed shafts.
  • Machining to Drawing: Blanks can be supplied with rough turning allowance, stepped diameters, keyways, tapered ends, or centre holes prepared for final machining at your yard.
Technical Specifications
Parameter Specification
Grades 17-4PH / UNS S17400, 316L, 2205, 2507
17-4PH Composition Cr 15–17.5, Ni 3–5, Cu 3–5, Nb 0.15–0.45, C ≤ 0.07
17-4PH Yield Strength ≥ 1000 MPa in H900, ≥ 725 MPa in H1150
316L Yield Strength ≥ 170 MPa
Duplex Yield Strength 2205 ≥ 450 MPa, 2507 ≥ 550 MPa
Diameter Range 6 mm to 300 mm
Length Up to 6000 mm, cut to order
Surface Turned, ground, polished
Testing UT, MPI, DPT on request
Packing Wooden case, rust preventive wrap
Applications

Typical applications include propeller shafts and shaft liners on fishing vessels, tugs, pilot boats, and pleasure craft; rudder stocks and pintles; stern tube components; propeller nuts; seawater pump shafts; and jet drive impeller shafts. Repair yards also order short lengths to replace corroded shaft sections on vessels already in service, matching the grade to the original specification to keep the vessel in class.

Because the bar can be supplied pre-machined, yards reduce the amount of turning performed onboard and shorten dry dock time — usually the largest cost in a shaft replacement.

Packaging & Quality Assurance

Shaft bars are protected with rust preventive oil and plastic wrap, then packed in wooden cases with timber supports to prevent bending during transport. Each piece is marked with grade, heat number, and size.

Certificates to EN 10204 3.1 include chemistry, tensile properties, and hardness at the specified temper, and ultrasonic or penetrant test reports are attached when the shaft is classed. For long shafts, we can arrange flat rack or break bulk loading with lifting points prepared in advance.

Ordering Information

Tell us the grade, diameter, length, surface finish, and quantity, and we will reply with a technical quotation within one working day. Round bars from 6 mm to 300 mm are cut on our band saws and lathes, bundled by diameter, wrapped in plastic film, and loaded into 20 or 40 foot containers.

Sample lengths of 300 mm are available for material verification before bulk orders are released. Our sales engineers will confirm mill certificates, heat numbers, and delivery dates in writing so that your purchasing team has a complete paper trail from inquiry to container loading.

Want to Know more details about this product
I am interested in 17-4PH Forged Stainless Steel Round Bar for Marine Propeller Shaft Applications could you send me more details such as type, size, quantity, material, etc.
Thanks!
Waiting for your reply.