316L Low Carbon Bright Peeled Molybdenum Bearing Steel Round Bar For Chemical Pump Shafts
Product Details:
| Place of Origin: | Shanxi, China |
| Brand Name: | Taigang |
| Certification: | ISO 9001:2015, EN 10204 3.1 Mill Test Certificate |
| Model Number: | 316L Round Bar S31603 |
Payment & Shipping Terms:
| Minimum Order Quantity: | 500 Kilograms |
|---|---|
| Price: | USD 3.6-6.8 / Kilogram |
| Packaging Details: | Plastic film bundle with wooden case |
| Delivery Time: | 7-10 days for stock sizes |
| Payment Terms: | T/T,L/C at sight |
| Supply Ability: | 2500 Tons per Month |
|
Detail Information |
|||
| Port: | Shanghai | Package: | Standard Sea-worthy Packing |
|---|---|---|---|
| Keyword: | Stainless Steel Round Bar | Place Of Origin: | Shanxi, China |
| Grade: | 316 / 316L (UNS S31600 / S31603) | Diameter: | 6mm - 300mm |
| Length: | 3000mm / 6000mm Or Cut To Order | Tolerance: | H9 / H11 |
| Finish: | Bright Peeled, Polished, Pickled | Molybdenum: | 2.0 - 3.0 Percent |
| Hardness: | ≤217 HB | Standard: | ASTM A276, ASTM A479, EN 10278 |
| Highlight: | 316 Stainless Steel Round Bar,316L Bright Peeled Bar,Chemical Pump Shaft Stock |
||
Product Description
Where 304 begins to pit, 316 takes over. The two to three percent molybdenum added to this grade raises resistance to chlorides, so the bar is used for pump shafts, valve trim, marine fittings and equipment that sees salt water, brine, bleaching agents or deicing chemicals. The low carbon 316L version is supplied as the default for welded assemblies because it avoids carbide precipitation in the heat affected zone, and it can be ordered alongside the standard 316 from the same heat control programme.
Bars are bright peeled and annealed, giving a smooth surface with a diameter tolerance of h9 to h11 that suits collet work on a CNC lathe. For the buyer comparing offers, the important question is where the molybdenum and nickel sit inside the specification window, and our certificates show the actual heat analysis rather than only the range.
- Molybdenum Bearing: A molybdenum content of 2.0 to 3.0 percent gives the bar pitting resistance that plain 304 lacks, extending service life in chloride, brine and coastal atmospheres.
- Low Carbon 316L Option: The 316L variant limits carbon to 0.03 percent, preventing sensitisation during welding and keeping intergranular corrosion resistance intact in the heat affected zone.
- Bright Peeled Finish: Peeling removes the rolled skin and surface defects, producing a clean bar at Ra 1.6 or better that machines without the interrupted cuts caused by scale.
- Elevated Temperature Service: The grade performs continuously to about 800 degrees Celsius in oxidising conditions, which suits exhaust components, furnace fittings and heat exchanger internals.
- Marine And Chemical Duty: Resistance to salt spray, chlorinated water and a wide range of organic and inorganic acids makes the bar suitable for deck hardware and chemical process shafts.
- Full Traceability: Heat number, chemical analysis, mechanical properties and dimensional inspection are recorded for every bundle and supplied as an EN 10204 3.1 certificate.
| Parameter | Specification |
|---|---|
| Grade | 316 / 316L / UNS S31600 / S31603 |
| Chemical Composition | C ≤ 0.08 (0.03 for L), Cr 16–18, Ni 10–14, Mo 2–3, Mn ≤ 2.0, Si ≤ 0.75 |
| Tensile Strength | ≥ 515 MPa |
| Yield Strength | ≥ 205 MPa |
| Elongation | ≥ 40 percent |
| Hardness | ≤ 217 HB |
| Diameter Range | 6 mm to 300 mm |
| Surface | Bright peeled, polished, pickled |
| Standard | ASTM A276, ASTM A479, EN 10278 |
| Packing | Plastic film bundle, wooden case |
The bar is specified where chloride attack is expected: chemical pump shafts and sleeves, valve stems, agitator shafts, marine propeller shaft liners, food and beverage equipment in salt environments, pharmaceutical reactor internals and coastal architectural fixings. It is also a common choice for medical and laboratory hardware that must survive repeated disinfection.
Because the grade tolerates welding without sensitisation in its low carbon form, fabricators use it for assemblies that combine a turned shaft with a welded flange or boss. For service above 60 degrees Celsius in chloride containing media, our 2205 and 2507 duplex bars offer higher stress corrosion cracking resistance and are quoted on request.
Bars are wrapped in plastic film, bundled by diameter and strapped with steel band before being packed into wooden cases or loaded into containers with timber dunnage. Grade, heat number and size appear on every bundle label.
EN 10204 3.1 certificates covering chemical composition, tensile properties and hardness are issued with the shipping documents, and positive material identification reports can be added when the end user requires incoming inspection evidence. Surface and dimensional checks are performed on each lot before packing.
Tell us the grade, diameter, length, surface finish and quantity, and we will reply with a technical quotation within one working day. Round bars from 6 mm to 300 mm are cut on our band saws and lathes, bundled by diameter, wrapped in plastic film, and loaded into 20 or 40 foot containers.
Sample lengths of 300 mm are available for material verification before bulk orders are released. Our sales engineers will confirm mill certificates, heat numbers and delivery dates in writing so that your purchasing team has a complete paper trail from inquiry to container loading.




