• Custom Cut Stainless Steel Round Bar and Stainless Steel Rod with Non-Standard Machining in 6-300mm Diameter
Custom Cut Stainless Steel Round Bar and Stainless Steel Rod with Non-Standard Machining in 6-300mm Diameter

Custom Cut Stainless Steel Round Bar and Stainless Steel Rod with Non-Standard Machining in 6-300mm Diameter

Product Details:

Place of Origin: Shanxi, China
Brand Name: Taigang
Certification: ISO 9001:2015, Mill Test Certificate EN 10204 3.1
Model Number: SS Round Bar 6-300mm

Payment & Shipping Terms:

Minimum Order Quantity: 500 Kilograms
Price: USD 2.3-9.5 / Kilogram
Packaging Details: Woven bag or wooden case, seaworthy packing
Delivery Time: 7-10 days for stock sizes, 20-25 days for custom cutting
Payment Terms: T/T,L/C at sight,Western Union
Supply Ability: 2000 Tons per Month
Get Best Price Contact Now

Detail Information

Port: Shanghai Package: Standard Sea-worthy Packing
Keyword: Stainless Steel Round Bar Place Of Origin: Shanxi, China
Grade Range: 304, 316, 316L, 2205, 2507, 430, C276, 27-7MO Diameter: 6mm - 300mm
Length: Cut To Order, 1000-6000mm Tolerance: H9 To H11, Peeled Or Turned
Finish: Bright, Polished, Peeled, Black, Pickled Standard: ASTM A276, ASTM A479, EN 10278
Technique: Hot Rolled, Cold Drawn, Peeled, Ground Test: Mill Test Certificate, PMI, Ultrasonic
Highlight:

Custom Stainless Steel Round Bar

,

Diameter 6-300mm Round Bar

,

Non-Standard Cutting Service

Product Description

Product Overview

This stainless steel round bar is produced for buyers who need a specific diameter, a specific length and a specific surface rather than a catalogue item. We hot roll, peel, cold draw and grind bars in the Shanxi works from 6 mm up to 300 mm and cut them to the exact length on your drawing, so a machining shop receives material that is ready for the first operation instead of material that has to be reworked.

Because we hold billet for several austenitic, duplex and nickel grades under one roof, a single purchase order can mix 304 shaft blanks, 316 pump stock and 2205 valve bodies without waiting for three separate mills. Non-standard requests are the core of this line: an unusual diameter such as 38.5 mm, a fixed length of 1180 mm, a keyway, a chamfer, a drilled centre or a threaded end are all handled by the same engineering team that writes the quotation.

Every bundle leaves the works with a mill test certificate, a heat number and a dimensional report, and material can be ultrasonic tested or PMI verified when the end use calls for it.

Key Features
  • Full Range Cutting: Bars are sawn and turned from 6 mm to 300 mm diameter with a length tolerance of plus or minus 0.5 mm on cut ends, so blanks arrive close to final size and machining time is reduced.
  • Mixed Grade Orders: Austenitic 304, 316 and 316L, duplex 2205 and 2507, ferritic 430, and nickel alloy C276 or 27-7MO can be combined in one shipment, which simplifies customs paperwork and freight cost.
  • Non-Standard Accepted: Special diameters, stepped shafts, keyways, centre holes, chamfers and threads are produced to drawing with first article inspection reports supplied on request.
  • Surface Options: Bright peeled, centreless ground, polished, pickled or black hot rolled finishes are available, with Ra 0.8 achievable on ground bars for seal and bearing seats.
  • Verified Chemistry: Each heat is checked by spectrometer before rolling and the result is printed on the certificate, and positive material identification can be performed on the finished bars.
  • Export Packing: Bars are bundled by diameter with plastic film and steel strapping, then placed into wooden cases or 20 foot containers, keeping edges protected during ocean transport.
Technical Specifications
Parameter Specification
Available Grades 304, 304L, 316, 316L, 2205, 2507, 430, C276, 27-7MO
Diameter Range 6 mm to 300 mm
Length Range Cut to order, 300 mm to 6000 mm
Diameter Tolerance h9, h10 or h11 as requested
Straightness 1 mm per meter maximum
Surface Finish Bright, peeled, ground, polished, pickled
Standard ASTM A276, ASTM A479, EN 10278
Testing Chemical analysis, tensile test, hardness, PMI, UT on request
Lead Time 7–10 days stock, 20–25 days custom
Packing Bundle with film, wooden case or container
Applications

These bars are used where a drawing, not a stock list, decides the material. Typical buyers are machining shops producing hydraulic piston rods, food industry shafts, pump shafts, valve stems, mixer agitators, fastener blanks and general engineering parts.

Maintenance departments also order short runs of one or two bars when a machine is down and the original diameter is not a standard size. Because we cut to length, customers avoid paying freight for material that will be scrapped, and because we keep several grades in stock, a mixed order covering a workshop rebuild can leave the works in a single container.

Packaging & Quality Assurance

Bars are bundled by diameter and grade, wrapped in plastic film, strapped with steel band and loaded into wooden cases or directly into the container with timber dunnage. Each bundle carries a label with heat number, grade, size and quantity.

We supply mill test certificates to EN 10204 3.1 as standard, and third party inspection by SGS, BV or TUV can be arranged before shipment. Any dimensional or surface defect found at destination is handled by replacement or credit after the inspection report is reviewed.

Ordering Information

Tell us the grade, diameter, length, surface finish and quantity, and we will reply with a technical quotation within one working day. Round bars from 6 mm to 300 mm are cut on our band saws and lathes, bundled by diameter, wrapped in plastic film, and loaded into 20 or 40 foot containers.

Sample lengths of 300 mm are available for material verification before bulk orders are released. Our sales engineers will confirm mill certificates, heat numbers and delivery dates in writing so that your purchasing team has a complete paper trail from inquiry to container loading.

To request a quotation, please provide the grade, diameter, length, surface finish and quantity required. Our engineering team will respond within one working day.

Want to Know more details about this product
I am interested in Custom Cut Stainless Steel Round Bar and Stainless Steel Rod with Non-Standard Machining in 6-300mm Diameter could you send me more details such as type, size, quantity, material, etc.
Thanks!
Waiting for your reply.