C276 Nickel Alloy Round Bar and 27-7MO Super Austenitic Stainless Round Bar with PREN ≥68 Solution Annealed
Product Details:
| Place of Origin: | Shanxi, China |
| Brand Name: | Taigang |
| Certification: | ISO 9001:2015, EN 10204 3.1 Mill Test Certificate |
| Model Number: | C276 / 27-7MO Alloy Bar |
Payment & Shipping Terms:
| Minimum Order Quantity: | 100 Kilograms |
|---|---|
| Price: | USD 28-55 / Kilogram |
| Packaging Details: | Wooden case with plastic film wrap |
| Delivery Time: | 15-25 days depending on grade |
| Payment Terms: | T/T,L/C at sight |
| Supply Ability: | 300 Tons per Month |
|
Detail Information |
|||
| Port: | Shanghai | Package: | Standard Sea-worthy Packing |
|---|---|---|---|
| Keyword: | Stainless Steel Round Bar | Place Of Origin: | Shanxi, China |
| Grade: | C276 (N10276) / 27-7MO (S31277) | Diameter: | 6mm - 300mm |
| Length: | 1000-6000mm Or Cut To Order | Finish: | Solution Annealed, Peeled, Pickled |
| Condition: | Solution Annealed And Quenched | PREN: | C276 ≥68, 27-7MO ≥48 |
| Standard: | ASTM B574, ASTM A276 | Test: | PMI, Hardness, Intergranular Corrosion Test |
| Highlight: | C276 Nickel Alloy Round Bar,27-7MO Super Austenitic Bar,Corrosion Resistant Alloy Rod |
||
Product Description
Two high-alloy grades share this product page because buyers of one frequently need the other. C276, also known as Hastelloy C276 or UNS N10276, is a nickel-chromium-molybdenum alloy with tungsten that survives strong oxidising and reducing acids, wet chlorine and hypochlorite. It is the standard answer when nothing else lasts in a chemical reactor.
The 27-7MO grade, UNS S31277, is a super austenitic stainless steel with 27 percent nickel, 7 percent molybdenum and a pitting resistance equivalent number above 48, delivering corrosion performance close to nickel alloys at a lower alloy cost. Both are supplied solution annealed, peeled and cut to length, with full chemistry and mechanical certificates. Selecting between them is a matter of media, temperature and budget, and our engineers will comment on the choice when an inquiry includes the process conditions.
- Severe Media Resistance: C276 resists hydrochloric and sulphuric acid, wet chlorine, hypochlorite and chlorine dioxide, making it suitable for reactors, scrubbers and pickling line hardware.
- High PREN Values: Pitting resistance equivalent numbers reach 68 for C276 and 48 for 27-7MO, well above duplex grades, which extends service life in chlorinated seawater and bleach circuits.
- Solution Annealed: Bars are annealed and rapidly quenched to restore a single-phase structure with full corrosion resistance and to remove forming stresses before machining.
- Two Cost Levels: 27-7MO offers corrosion performance near nickel alloy level at a considerably lower price per kilogram, allowing grade selection by media severity and budget.
- Weld and Fabricate: Both grades can be welded by TIG with matching filler and machined with carbide tooling, and cutting data is supplied with the certificate.
- Full Alloy Traceability: Heat number, chemistry, hardness and, where required, intergranular corrosion test results accompany the shipment on an EN 10204 3.1 certificate.
| Parameter | Specification |
|---|---|
| Grades | C276 / UNS N10276 / Hastelloy C276; 27-7MO / UNS S31277 |
| C276 Composition | Ni balance, Cr 14.5–16.5, Mo 15–17, W 3–4.5, Fe 4–7, C ≤0.01 |
| 27-7MO Composition | Ni 26–28, Cr 20–22, Mo 6.5–8, N 0.3–0.4, C ≤0.02 |
| C276 Tensile Strength | ≥690 MPa, yield ≥283 MPa |
| 27-7MO Tensile Strength | ≥690 MPa, yield ≥345 MPa |
| PREN | C276 ≥68, 27-7MO ≥48 |
| Diameter Range | 6 mm to 300 mm |
| Surface | Peeled, pickled, solution annealed |
| Standard | ASTM B574, ASTM A276 |
| Packing | Wooden case, plastic film wrap |
C276 bar is used in the harshest positions of a chemical plant: reactor internals, agitator shafts, thermowells, heat exchanger tubes and tube sheets, flue gas desulphurisation dampers and scrubber nozzles, chlorination equipment and pharmaceutical reactors handling chlorinated solvents.
27-7MO serves the same industries where the media is aggressive but not quite extreme, including pulp mill bleach plants, seawater piping, sulphuric acid handling and organic acid processing. Both grades are also used for fasteners that hold dissimilar materials together in corrosive service, where galvanic acceleration would destroy a standard stainless fastener quickly.
Alloy bars are wrapped in plastic film and packed in wooden cases with foam or timber separators to avoid surface damage in transit. Each case is marked with grade, heat number, size and quantity.
Certificates to EN 10204 3.1 including full chemical analysis and mechanical properties are issued, and intergranular corrosion testing to ASTM A262 practice can be added for C276 when specified. Third-party inspection and positive material identification reports are available on request.
Tell us the grade, diameter, length, surface finish and quantity, and we will reply with a technical quotation within one working day. Round bars from 6 mm to 300 mm are cut on our band saws and lathes, bundled by diameter, wrapped in plastic film, and loaded into 20 or 40 foot containers.
Sample lengths of 300 mm are available for material verification before bulk orders are released. Our sales engineers will confirm mill certificates, heat numbers and delivery dates in writing so that your purchasing team has a complete paper trail from inquiry to container loading.



