Titanium Stabilized Stainless Steel Round Bar Resistant to 870C Intergranular Attack with 6mm to 300mm Diameter
Product Details:
| Place of Origin: | Shanxi, China |
| Brand Name: | Taigang |
| Certification: | ISO 9001:2015, EN 10204 3.1 MTC |
| Model Number: | 321 Round Bar |
Payment & Shipping Terms:
| Minimum Order Quantity: | 500 Kilograms |
|---|---|
| Price: | USD 2200-6500 / Metric Ton |
| Packaging Details: | Interleaved bundles, steel strapped, seaworthy wooden crate with timber dunnage |
| Delivery Time: | 7 days for stock sizes, 20-30 days for custom cutting |
| Payment Terms: | T/T, L/C at sight |
| Supply Ability: | 800 Metric Tons per Month |
|
Detail Information |
|||
| Diameter Range: | 6mm - 300mm | Length: | 3000mm / 6000mm Or Fixed Cut |
|---|---|---|---|
| Tolerance: | H9 / H11 | Surface Finish: | Pickled, Peeled, Turned Or Ground |
| Condition: | Solution Annealed / Annealed | Test Certificate: | EN 10204 3.1 |
| Delivery State: | Straight, Chamfered Ends On Request | ||
| Highlight: | Titanium Stabilized Against Intergranular Corrosion,Continuous Service to 870C,ASTM A276 A479 Round Bar |
||
Product Description
321 is a titanium-stabilized austenitic stainless steel in which titanium is added at a minimum of five times the carbon content, so that carbon is tied up as titanium carbide rather than chromium carbide. The result is a round bar that can be welded and then held in the 425 °C to 870 °C range without the chromium depletion that causes intergranular corrosion in unstabilized grades.
We supply 321 as hot rolled and annealed, peeled, turned, or centreless ground bar from 6 mm to 300 mm, with ultrasonic and dye penetrant testing available for pressure-retaining components. The grade is the standard answer for exhaust and furnace hardware where 304 or 316 would sensitize after welding, and it retains useful strength and oxidation resistance in cyclic high-temperature duty.
- Titanium-Stabilized Chemistry: Titanium at five times the carbon level precipitates carbon as titanium carbide, leaving chromium in solution and preventing sensitization even after slow cooling through the carbide precipitation range.
- Intergranular Corrosion Resistance: Because chromium depletion at grain boundaries is suppressed, welded joints and heat-affected zones remain resistant to intergranular attack in oxidizing acids and high-temperature service up to about 870 °C.
- High-Temperature Strength: The grade retains roughly 90 % of its room-temperature tensile strength at 400 °C and continues to carry load in the 500 °C to 800 °C band where carbon steel would creep rapidly.
- Weldability Without Post-Weld Anneal: Sections welded with 347 or 321 filler do not normally require a post-weld solution anneal, which removes a furnace step for large fabricated assemblies and reduces distortion risk.
- Good Forming and Machining: The annealed bar bends, swages, and machines much like 304, so existing tooling and programs transfer with only minor feed adjustments for the slightly higher work-hardening rate.
- Full Certification Package: Heats are released with spectrographic chemistry including the titanium-to-carbon ratio, mechanical properties, grain size, and, where required, intergranular corrosion test results to ASTM A262 Practice E.
| Parameter | Specification |
|---|---|
| Grade / UNS | 321 / S32100 |
| Chemical Composition | C 0.08 max, Cr 17.0–19.0, Ni 9.0–12.0, Ti 5×C min to 0.70 |
| Standard | ASTM A276, ASTM A479, ASTM A213 |
| Diameter Range | 6 mm – 300 mm |
| Condition | Solution annealed 1050–1120 °C, pickled or bright |
| Tensile Strength | 620 MPa typical, 515 MPa minimum |
| Yield Strength | 290 MPa typical, 205 MPa minimum |
| Elongation | 40 % minimum in 50 mm |
| Max Service Temperature | 870 °C continuous, 925 °C intermittent |
| Tolerance | h9 / h11 drawn, ±0.05 mm ground on request |
| Surface Finish | Pickled, turned, peeled, ground, or polished Ra 0.8 |
| Length | 3000 mm / 6000 mm random or fixed cut to 0.5 mm |
| Test Certificate | EN 10204 3.1 mill test certificate per heat |
321 is solution annealed at 1050 °C to 1120 °C and water quenched or rapidly air cooled. The titanium addition makes the grade slightly more prone to nitride and carbide banding during casting, so we control billet conditioning and verify inclusion levels before rolling. Titanium-stabilized bar can be age hardened only marginally and is normally supplied annealed; heavy cold work is used where higher strength is needed, followed by a stress relief below the sensitization range to protect the stabilized structure.
The grade is widely used for automotive and heavy truck exhaust manifolds, downpipes, and flexible bellows; furnace doors and fixtures; heat exchanger tubes and shells; expansion joints; jet engine tail cones; superheater supports; kiln internals; and welded pressure vessels that cannot be post-weld annealed. It is also selected for aircraft exhaust stacks and for chemical plant equipment handling oxidizing media at elevated temperature.
Bars are supplied with end caps, interleaved to prevent fretting, strapped into bundles, and packed in seaworthy crates. Heat numbers are stencilled on each bundle and repeated on the packing list. For pressure or aerospace orders we can add ultrasonic inspection to ASTM A388, dye penetrant to ASTM E165, and third-party witness by Lloyd's or TÜV before shipment.
Specify grade 321, diameter, condition, finish, length, and test requirements when requesting a quotation. For welded fabrication, state whether an intergranular corrosion test to ASTM A262 Practice E is needed. Ground bar to h9, peeled bar, hollow sections for machining, and cut-to-length blanks with chamfered ends are all available; our technical team will confirm the titanium-to-carbon ratio requirement against your welding procedure.





